8 CMD Commands For WiFi Networks

 Windows has features that are easy to use, for example, such as Change adapter settings to make settings for network adapters. But if you want full control of your network. That means you can access all the operating systems offered, so you have to start using the Command Prompt.

For example you can use CMD commands to manage WiFi networks to check internet connections, network connections, view information about network devices, and find out the connections between your PC and other devices. This time we will share some CMD commands for WiFi networks.

1. Pings

ping is perhaps the simplest network diagnostic command. This is used to verify the TCP/IP connection to the network host. This command works by sending multiple packets of data and seeing how many packets come back.

If there are some packets that are not returned, this will cause packet loss. This will cause poor performance when you are playing online games or streaming videos. To use it, simply enter the command, followed by the domain name or IP address of the host you want to test.

PING Command CMD For Wifi Network

By default, it sends 4 packets, each waiting 4 seconds before it times out. You can increase the number of packages like this:

ping www.schemafix.com -n 20

And you can increase the timeout duration like this (value is in milliseconds):

ping www.schemafix.com -w 10000

2. TRACERT

tracert stands for traceroute command. It is used to keep track of all problems that appear on the network. It can also be used to track packet routes. Here's an example of its use:

TRACERT CMD Command For Wifi Network

The command displays a line-by-line summary of each hop, including the latency between you and the particular hop and the IP address of that hop (plus the domain name if available).

3. PATHPING

pathping is more or less similar to tracert which is more informative than tracert. But it takes long time to execute. After sending packets from you to a certain destination, it analyzes the routes taken and calculates packet loss on a per-hop basis. Here's an example of its use:

PATHPING CMD Commands for Wifi Networks

4. IPCONFIG

ipconfig is used to find the IP address of a device. IP address is Uniquely Identify the computer in the network. It can also find a list of IPv6 address items that are replacements for IPv4 addresses that are about to expire. It is also one of the most used network commands on Windows.

IPCONFIG CMD Command For Wifi Network

The default output shows each network adapter on your system and how they resolve. Use this command to clear your DNS cache:

ipconfig /flushdns

Flushing the DNS cache can be helpful when your internet is working, but certain websites or servers are unreachable for some reason (for example, the website times out and won't load).

5. GETMAC

As we know the MAC address (Media Access Control) is the physical address of the device set by the factory. Some people use MAC addresses to limit which devices can connect to a network. The getmac command is used to display the MAC address for the local system. It also shows the number of network adapters in a system.

GETMAC CMD Command For Wifi Network

You may see more than one MAC address depending on how many network adapters are connected to your system. For example, Wi-Fi and Ethernet connections will have separate MAC addresses.

6. NSLOOKUP

nslookup stands for Name Server Lookup. This is a command that can help you verify that DNS name resolution is working properly. When you run the nslookup command against a hostname, the tool will show you how the name was resolved, as well as which DNS server was used during the lookup.

NSLOOKUP CMD Command For Wifi Network

It should be noted here that certain domain names are not tied to a specific IP address, which means that you may get a different IP address each time you run a command. This is normal for larger websites as they spread their workload across many different machines.

If you want to convert an IP address to a domain name, just type the address in your browser and see where it is. Not all IP addresses point to domain names, and many IP addresses are unreachable over the web.

7. NETSTAT

netstat is a tool for statistics, diagnostics and analysis of a network. It's powerful and complex, but can be quite simple if you ignore the advanced aspects you don't need to know.

NETSTAT CMD Command For Wifi Network

By default, this command shows all the “active connections” in your system whether they are on LAN or on the internet. Active connection doesn't mean data transfer happened, it can mean port is open and ready to accept connection.

Indeed, netstat is mostly useful to casual users because of its ability to display port information, and it can come in handy when you need to forward ports. But the command also has about a dozen switches that change what kind of information is displayed, for example if you add -r to the command it will show the routing table.

8.NETSH

netsh stands for Network Shell. This is a cmd command for networking that lets you view and configure almost any network adapter on your system with more detail and granularity than the previous command.

Running the netsh command alone will shift the Command Prompt into network shell mode. There are several different "contexts" within this shell, including one for routing-related commands, one for DHCP-related commands, and one for diagnostics, among others. But you can use it to run individual commands too. Here's an example of using it to see all network shell contexts:

NETSH CMD Command For Wifi Network

And this to see all commands in contexts:

NETSH WLAN CMD Command For Wifi Network

You can drill down one more layer to find all the subcommands within those commands:

NETSH WLAN SHOW CMD Command For Wifi Network

Another example if you want to take a look at all the wireless network drivers on your system and their properties. Run the following command:

netsh wlan show drivers

Shell networking is quite complex to explain. Just know that if you want to get real technical with your network configuration, you might need to use this command-line utility.

Conclusion

So those are some CMD commands for WiFi networks. For anyone new to Windows network commands, a cheat sheet is useful. With a few references, you can use various cmd commands to gather information on your WiFi network, and the Internet.

________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ________

That's all for the article 8 CMD Commands for WiFi Networks. Look forward to other interesting articles and don't forget to share this article with your friends. Thank you…

Resa Risyan

Just an ordinary person who wants to share a little knowledge, hopefully the knowledge I provide can be useful for all of us. Keep in mind! Useful knowledge is an investment in the afterlife.